A Comprehensive Guide on How to Add an ONVIF IP Camera to a Hikvision DVR with Ease


With the help of Hikvision DVR, you get the possibility to do more with your surveillance system. It can help you record as well as manage different analog cameras. There are some devices of it which have a hybrid technology to work with. Due to the incorporation of this technology, they can utilize both the analog and IP cameras. You can easily add analog cameras with this device whereas there might be some problems adding an ONVIF IP one. However, if you are wondering how to add an ONVIF IP camera to a Hikvision DVR, then this article is going to be helpful for you. Don’t worry, the setup procedure is faster and easier than you think. Hence, keep reading it. However, if you face any trouble while adding the ONVIF camera, you can always connect with a service provider for Hikvision in Dubai.

The Hybrid Hikvision DVR – a Short Description

You may be thinking about what are the technologies that a hybrid Hikvision DVR would support. It is compatible with all the analog cameras that have CVBS, AHD, and HD-TVI technologies with them. The IP cameras which are compliant with the ONVIF technology are also supported by this device. Thus, with a hybrid Hikvision DVR, you can select multiple types of cameras. You can even mix them in the same surveillance system if you want. For IP cameras, you can connect them with the modem and after that, add the camera to the DVR through LAN.

Steps to Follow to Add an ONVIF IP Camera to a Hikvision DVR

As already discussed, the setup procedure of Hikvision DVR with an ONVIF IP camera is quite simple. However, it’s always necessary to keep this DVR within the same IP range of all its connected device. This is important because they are the most significant part of the network where it is connected to. There are a few steps to follow to set up the ONVIF IP camera with this device.

Step 1: Set up the IP Address of the DVR

Each system comes with its own IP address with a different range. But the whole concept of setting up the IP address is the same. Depending on the network range, you can configure your DVR. Usually, the IP addresses start from 192.168.2. X, where X is a number, that varies from 1 to 254. In your case, you need to use the IP address of your system. If you have set up the correct IP address, then you can follow the steps in the section below.

  1. Use your mouse and right-click on the screen in order to open the Menu in your device.
  2. Next, click on the Configuration icon to open it which appears on the second row of menu items.
  3. Check whether the date and time settings are correct in the system. You need to do so because it will ensure that the system is recording correctly.
  4. Click on the Network button from the left navigation panel.
  5. Now, check in whether the IP address is correct according to the network range of the DVR.

By following the steps stated above, you can easily set up the IP address of the Hikvision DVR. You can also check the subnet mask of the DVR with the gateway which depicts the router address.

Step 2: Set Up the IP Camera

Once you are done with the setup procedure of DVR IP address, now you have to set up the IP camera. It is also quite simple as of the previous steps. So, to set up the IP camera, go through the section below.

  1. Right-click on the screen using your mouse and open the menu by clicking on it.
  2. Open the camera menu that you can find on the second row beside the configuration menu.
  3. As the DVR camera management screen appears, you need to click on the Custom-adding option.
  4. After that, a new pop up window would open where you have to fill in the required fields with appropriate information.

    • Check the IP address whether it matches with your DVR.
    • From the dropdown list, select the ONVIF protocol.
    • As per the management port is concerned, type 8899 in the box.
    • The transfer protocol should be set to Auto mode.
    • In the username field, type ‘admin’ and the password will be your camera password.
  5. Now, click on the Add button to successfully add the IP camera.

These are the fundamental steps to follow to add an ONVIF IP camera with a Hikvision DVR in your entire surveillance system. After completing them, you should be successfully able to check its status. If there was no problem in adding the camera, then you will get the OK status on the screen.

Note:

If you got the message ‘Risk Password’ in the security status, then that means you are using a weak password. In such circumstances, you should change the camera password immediately to a stronger one with a different combination.  To do that, click the Back button and change the password as per your convenience.

Step 3: IP Camera Recording Setup

After setting up the IP address of the camera, now you can start recording. Clicking on the Record button can easily do that for you. Select the IP camera from the list in the Schedule screen of your DVR. There are multiple ways to record video with such IP cameras. It might be a continuous recording or a motion one whatever it is that depends upon your choice. M|A, and M&A, are the two important specifications of the IP camera that detects the motion with advanced technology.


As we all know, the most common option of recording CCTV footage is continuous recording. In such a case, the DVR commands the camera to record for the entire time. Whereas for the Motion recording, the scenario is a bit different. In such circumstances, the recording only takes place when the camera detects any kind of movement. It is so helpful as it can save extra storage space from your CCTV maintenance system. But when you are doing this, make sure that you have changed the settings in the DVR menu. To do that, follow the steps as mentioned in the section below.

  1. Open the menu as described earlier in the above section and go to the Camera Management option.
  2. Click on the Motion option from the list and open it.

After that, enable the motion detection to use the camera for recording, only when there is any movement detected. Whenever you are asking for CCTV installation service, make sure that you have enough storage capacity. Having an HDD correctly installed on your surveillance system can help you a lot.

Step 4: Storage Optimization of the DVR

Recording can never be completed if there is no storage method in the system. Therefore, it’s important to know about the storage for determining how long you can retain the footage. It always depends on the algorithm of how a system is going to store the footage. The Hikvision DVR compresses the footage by using a different algorithm to store it with reduced file size. With the CODECs compressing algorithm, this DVR can optimize the recording time based on their requirements.

Utilizing the four steps as mentioned in the above section, you can easily add and configure the IP camera with the Hikvision DVR.

Concluding Remark

That’s all you need to know if you were wondering how to add an ONVIF IP camera to a Hikvision DVR. The connection procedure of an IP camera with the Hikvision DVR is not a hard task to do. If you have gone through each of the steps, then you won’t need any CCTV repair or CCTV maintenance service at your doorstep. It’s important to pay attention to all of them, to ensure that you are getting your security camera set correctly. Whatsoever, make sure that the camera you are using is compatible with the DVR and it’s using the correct port with the right IP. If you are still unable to set up the IP camera with the DVR, then check whether the camera is compatible with it.

FAQs

  1. Can IP Cameras Record to DVR?

It lies on the type of DVR you are using and whether it is capable of doing so or not. Analog-only DVRs are not compatible with such IP cameras in the surveillance system due to the IP addresses they have. It’s only possible with the digital DVRs that use different browsers to work.

  1. Are HKVISION Cameras ONVIF?

Not all the Hkvision IP cameras come with the ONVIF compliance. The cameras with the firmware version 5.5.0 or the higher are ONVIF compliant. The user interfaces may not be identical, but the usability is quite the same.

  1. How do I Connect My ONVIF Camera with the DVR?

At first, make sure that the device you are using is compatible with the ONVIF protocol. If it is compatible, then go to Settings and click on the Add button which would open several options. Search for local network devices from the search option and then select the camera from the result. Now, you can easily connect the camera with your surveillance system without any problem.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Call Now Button