In today’s modern convenience and everyday life, Geyser plays an essential role and is very helpful for household and commercial purposes. It’s used for several tasks such as bathing, showers, dishwashing, cooking and laundry.
Therefore, this electric appliance is capable of giving us hot water whenever needed and is easy to maintain at the desired temperature. However, like any electric appliance, geysers sometimes produce some issues while functioning that disturb the user’s chores and affect their busy schedule.
So, if you are looking for solutions to your concern, why is my Geyser not working? Then don’t worry. You can try out certain efficient solutions by yourself to fix the issue. It does not matter if you are a Geyser of any brand or model, or type!
Just go through this blog to get to know the best troubleshooting solutions to fix the Geyser is not working issue.
Quick & Easy Solutions to Fix the Gas Is Not Working Issue:
Check Power Supply:
One of the main issues with the Geyser not working is connected to the power supply. You should make sure that you have turned on the switch of your Geyser and power outlet, and that the socket is also working properly.
You should try verifying the power supply in the following way.
- Try to plug your appliance into a different socket to verify its functioning.
- Use a tester to validate the voltage power at the geyser.
- Carefully look for the power indicator light it’s viewing.
- Try to plug into another appliance in the same socket to verify it is working.
If power is present but your geyser is still not working, then the issue may be connected to the internal thermostat, heating element, gas, etc. Go to the next solution.
Verify Thermostat Or Temperature Setting:
Another reason the Geyser is not working may be connected to the thermostat or Temperature. You should check the temperature or thermostat settings of your Geyser because it might be the thermostat may be faulty or set too low.
Sometimes, the issue happens in the thermostat and it is found it be faulty, then it does not produce hot water. Similarly, when the setting of the temperature is very low, no hot water is generated. The best solution is to contact a professional expert to get an inspection of your Geyser and repair the problem.
Check Heating Element Issue:
Often the Geyser does not work or does not produce hot water when issued with the heating element, as it could be burnt out. In such a case, you should perform the troubleshooting steps quickly to fix the problem. But before starting the steps, make sure to only attempt the step by yourself if you are knowledgeable about electrical appliances.
- Turn off the power supply of the geyser from the main electric board.
- Drain your Geyser tank. Open the heating element panel if it’s possible.
- Unscrew the entrance cover and disconnect the wiring.
- This is the right time, modify the previous heating element with a new one.
- Afterwards, reconnect the wires, fill the geyser tank with water.
- Then switch on the Geyser power.
If the issue persists, then call a certified technician now to get a Geyser repair service and fix the issue.
Ensure the Gas Cylinder Is Not Empty:
Most of the time the geyser does not respond or function when the geyser gas is empty or the gas valve is closed.
You must inspect whether the geyser gas is empty or not. To check your geyser gas, you can follow the given steps.
How to Check a Gas Cylinder?
- Pour hot water down the side of the geyser gas cylinder and then observe the liquid gas or temperature.
- You can weigh your geyser gas cylinder; if you feel the heavy weight, that means your cylinder is full.
- If you feel less weight, that means your cylinder needs refilling again.
Important Note: Always handle your geyser gas cylinder with safety and care to avoid sparking near it.
The best solution is to contact a technician to get immediate service for Geyser gas refilling and to repair the problem.
Check Overheating Issue:
Sometimes the geyser does not work or shuts down for some time due to overheating. Therefore, in the present time, modern geysers come with a thermal cut-off or resettable thermostat function.
So, when the water gets too hot, the thermal cut-off turns off the unit for some time, to avoid bursting. When you notice that your geyser is overheated, you need to cool it. Once it has cooled down and reset, turn the power back on and then test if it starts functioning.
In case your geyser still doesn’t function, then you just contact a professional expert for further diagnosis and repair.
Reset the Geyser Power:
Also, you can often fix the geyser is not working issue and related common troubles by just resetting the power button.
So, you must first confirm that it has a reset button on your geyser, so that the reset button is activated again.
Follow these steps to reset Geyser:
- You need to press the reset button on your geyser, placed close to the thermostat.
- Then press & hold the reset button for a few seconds.
- After that, you will hear a click noise of reset.
- Then reset the power of your geyser, and confirm its functioning.
In case your geyser still does not work, then you must contact a skilled technician for further diagnosis and repair issues.
Final Words!
Geysers have become a necessary part of modern homes, convenience and lifestyles. It gives a blend of compact, comfy, efficient and steadfast solutions for hot water when needed. You can get immediate assistance and diagnosis service through professional geyser repair services in Dubai experts and quick-fix issues.
Thus, skilled and experienced experts can resolve any kind of complex issue with cost-effective and tailored solutions easily. By getting accurate help, your Geyser would get back to its proper functionality.