A washing machine that doesn’t drain properly is enough to turn your laundry routine into a disaster. Your clothes end up sopping wet and you are stuck trying to figure out why the washer not draining water. Trust us, you are not alone in suffering from such a situation. However, solving the mystery of why the water isn’t leaving the washer drum and restoring the appliance to its virtue – both are possible.
In this guide, you will come across the possible causes for water not draining in washers, and how to address the situation. Also, we have included some easy ways to prevent similar washing machine drain problems from happening in the future.
Why is My Washer Not Draining Water?
Let’s have a closer look at the popular or reported culprits behind the water not draining in washers. Typically, these problems are related to blockages, mechanical troubles, and settings mistakes. So, let’s review them one by one.
1. Kinked Drain Hose
For your information, the drain hose helps the washer carry the water water out of the drum and into the plumbing system. So, the drain hose can’t perform its job if it gets clogged with debris, such as:
- Lint
- Hair
- Soap scum
As a result, the hose will restrict the water flow. And, the drum will be a pool.
Steps to Check
- Make sure that the washing machine is turned off. Unplug it from the power outlet.
- Now, locate the drain hose at the back of the washer.
- Carefully detach the hose from the washer and the drain pipe.
- Then, inspect the drain hose for any visible kinks or blockages. Also, you can use a long stick or plumber’s snake to push out any clogs gently.
2. Damaged Lid Switch
For top-loading appliances, the lid switch acts like a safety feature that restricts the washing machine from spinning or draining if the lid is open. So, you can come across LG washer drain problems if the lid switch fails. However, everything else might work fine.
How to Inspect?
- Refer to the user manual to find out the lid switch. Then, use a pen or screwdriver to press the lid switch manually. If the washer begins draining again then the lid switch is faulty.
- Replacing the switch will eradicate the washing machine drain problems. Well, a technician can easily replace the switch and make your appliance work in no time.
3. Blocked Pump Filter
Most washing machines come with a pump filter that helps catch debris, like:
- Lint
- Small bits of fabric
- Coins, etc.
The filter prevents all this debris from reaching the pump. In the event of this filter being clogged, you will experience water not draining in washers. Consequently, you end up with a wet load.
How to Check?
- First of all, navigate to the pump filter as the user manual suggests. Generally, the filter resides behind a small access panel near the bottom front of the machine.
- After that, access the panel and bring out the filter.
- Clean the filter by removing lint, dirt, or other foreign objects. If the filter is excessively dirty, consider it rinsing under warm water.
- Once the filter is clean, place it back and attempt to run the drain cycle.
4. Imbalanced Load
Have you overstuffed your washer? Due to an uneven load, you might encounter a washer not draining water problem. As reported by Washing Machine Repair Dubai pros, a washer that’s off-balance may stop during a cycle. And, that can cause the washing machine to get stuck in the draining phase.
Steps to Check
- Simply, open up the washing machine and cast your attention to the load.
- If the load seems uneven, redistribute the clothes, thus, the weight will be more balanced.
- After adjusting the load, try to run the cycle again.
5. Too Full Tub
Similarly, overloading the appliance can lead to water not draining in washers. If the tub or drum is too full of clothes, the washer might not be able to spin the water out efficiently.
How to Examine?
- Start by opening the washing machine door and see how many clothes are inside.
- Also, refer to your washer manufacturer’s guidelines on loading and unloading.
- If the tub seems to be too full, you can take out a few items.
- Then, run a shorter cycle.
Make sure that you follow the manufacturer’s recommendations for load size to avoid such washing machine draining problems in the future.
6. Jammed or Broken Pump
The pump is the component of your washing machine that is responsible for pushing water out of the appliance during the drain cycle. So, your washer ends up not draining properly if the pump is jammed or broken somehow.
Steps to Fix
- Listen for any strange grinding, buzzing, or rattling noises when the washer is still running. If you can hear such sounds then chances are that the pump is either malfunctioning or stuck.
- Typically, a pump replacement works whatever the situation is. This generally involves removing the panel to access and replace the washer pump. However, this can be tricky for beginners. So, we recommend hiring a Washing Machine Repair Dubai technician for the process.
7. Defective Water Level Valve
The water level valve inside the washing machine detects how much water is in the drum. Also, it regulates the water level during the wash and rinse cycles. However, you will come across LG washer draining problems if the valve doesn’t operate appropriately.
In fact, a malfunctioning valve can cause the appliance to incorrectly detect water levels. As a consequence, the washer might experience improper draining.
How to Check and Fix?
- In case your washing machine fills up with too much water and doesn’t drain at all, it can be a sign of a faltering water level valve.
- If you suspect that a faulty water level valve is responsible for the washer not draining water, get your appliance checked. Indeed, only an experienced technician can replace the water level valve with a working one.
8. Blocked Drainpipe
Even after the drain hose, pump, or water level valve is working, a clog inside the drainpipe itself can still prevent the water from draining inside the washer. Over time, fabric fibres, soap scum, and grease can build up inside the drainpipe.
How to Examine and Solve?
- If accessible, try to run water through the drainpipe. Then, you will be sure whether the drainpipe is clear or not.
- However, you need to hire a plumber if you can’t access and treat the drainpipe. Only a professional plumber can clear the blockage and make your washer resume draining effectively.
9. Broken Drain Pump Belt
Is the washing machine you use a bit old or basic? Then, chances are that your appliance uses a belt-driven pump and the belt might have worn out. As a result, the pump can’t work effectively and you witness the washer not draining water.
How to Fix?
- Begin with inspecting the belt. For that, follow the manufacturer’s instructions on how to access the belt-driven pump. You might have to remove the rear or front panel of the washer depending on the core mechanism.
- Once you access the component, look for signs of cracking, wear, or snapping. If the belt appears to be damaged, consider a replacement. By the way, contact a Washing Machine Repair Dubai company to securely proceed with the replacement.
10. Improper Wash Cycle Configurations
Sometimes, the problem is not mechanical. It can be a simple user error that you might have overlooked. If you choose the wrong cycle like ‘hand wash’ or ‘delicate’ then you might face washing machine drain problems.
How to Eradicate?
- Double-check whether you have chosen the right cycle for your laundry load.
- In addition, make sure that the cycle has a spin or drain phase. If you set the appliance to some ‘delicate’ or ‘quick wash’ setting, then it may skip the spin cycle. And, it will leave water in the tub giving you the illusion of water not draining in washers.
- If you still see the LG washer draining problems, give it a reset.
Handy Preventive Tips to Avoid Washing Machine Draining Problems
Hopefully, you have fixed the LG washer draining problems so far. However, disaster can strike at any time if you are not careful enough. That’s why Washing Machine Repair Dubai professionals have provided some tips to keep your appliance in good shape.
Examine the Drain Hose Regularly
Kinks or blockages are common for drain hoses. So, inspect the drain hose for such clogs. Keeping the hose clean helps water flow freely.
Avoid Overloading the Washer
Ensure not to stuff the washing machine too full. After all, an overloaded machine can put strain on the pump and other components. So, the appliance might not drain properly.
Clean the Pump Filter
Do you use fabric softener or have pets? Then, include cleaning the pump filter in your regular schedule to keep your washer up and running all the time. Once a month would do the job to eliminate the washer not draining water properly situation.
Keep the Washer Balanced
Before you start a load, ensure that you have evenly distributed the load. As you already know, an imbalanced load can restrict the washer from spinning and draining properly.
Utilise the Right Detergent
Using the wrong type of detergent or even using the right one in excessive amounts can cause too many suds. And, they cause clogs inside the drain hose. Hence, you should only use the recommended type and amount of high-efficiency detergent.
Call for Instant Solution for Washing Machine Repair in Dubai
If you have tried all the basic troubleshooting steps and your washing machine still exhibits draining issues, it’s time to call a professional. So, hire a Washing Machine Repair Dubai expert to address the intricate problem. A healthy washing machine is important to maintain the laundry order.